Advertisements

What is TWRP

TWRP Stands for Team Win Recovery. The Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which functions often unsupported by stock recovery images. Your route and Unroot Devices are easy.

Contents Show

Get Ready to Install TWRP Recovery on Xiaomi Mi 10 Pro

Your device must have the bootloader unlocked. Download and Install TWRP Recovery On Xiaomi Mi 10 Pro and Easy to Root and Unroot Your Device

Xiaomi Mi 10 Pro Information

It comes with a 6.67-inch OLED Display packed with similar screen panel as Mi 10 as 2340×1080 pixel resolution, HDR10+, 90Hz @FHD+ support with a peak brightness of 1200 nits. It also packed a flash-in-display fingerprint scanner. It even had a Software-based Facial recording using a Front camera to face Unlock. The chipset on the device is powered by Qualcomm Snapdragon 865 Soc paired with 12 GB of LPDDR5 and up to 512 GB of UFS 3.0 storage. To power, the device is equipped with a 4500mAh battery support 50W Fast charge, 30W Wireless and 10W reverse charging.

Xiaomi MI 10 pro packed a Quad rear camera module housing a 108MP OIS primary camera lens + 20MP f/2.2 Ultra-Wide of 117° FoV + 12MP F/2.0 portrait lens + 8MP telephoto lens with 10x hybrid zoom and OIS Capability. As for connectivity, there is a USB TYPE-C, NFC, and Bluetooth 5.0 support. In Audio, it gives a Stereo speaker, and Hi-res Audio certified.




Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Losing data on your Realme 3 Pro. If you are responsible for any mistakes, follow the flashing guide for the files. There were some functions that don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Basic Pre-Requirements

  1. Enable the USB Debugging on your Xiaomi Mi 10 Pro
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the bootloader of  Xiaomi Mi 10 Pro: Follow this guide to unlock the bootloader.
    –Quick Disclaimer
    Then, Download and Manually Install Android USB Drivers on your PC
  4.
  5. Additionally,  Download TWRP of Xiaomi Mi 10 Pro




How to install TWRP on Xiaomi Mi 10 Pro

  1. First, Switch Off your Smartphone
  2. Open your Mobile Fastboot
  3. Using power off your device and then hold the Volume Down + Power button
  4. Now, Open the Adb Folder on your PC and Laptop
  5. Then, Select the Address Bar of Adb File
  6. Type Cmd and hit the Enter button
  7. Types the command in Cmd (Inside “Filename,” You can drag the file directly to the CMD instead of Typing.)
  • Fastboot Devices
  • fastboot Flash Recovery then Type “TWRP filename.img” and Hit Enter
  • fastboot boot then Type “TWRP fileName.img” (using Drag and Drop on Cmd)

Congratulations, you have successfully installed TWRP File on Xiaomi Mi 10 Pro

How to Root Xiaomi Mi 10 Pro

There are two Methods to Root You Xiaomi Mi 10 Pro

  • By using SuperSU Zip
  • By Using Download Magisk Zip

Using SuperSU Zip

  1.  Download SuperSU Zip  and Download No verity opt encrypt.zip and Movie to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. For TWRP Recovery, Go to Android Backup
  5. TWRP Recovery, Select INSTALL
  6. Then Browse and Select the saved file of  SuperSU Zip
  7. Now Click Install Button
  8. Again go to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  9. Finally, Reboot Your Device
  10. Congratulation, you successfully Rooted your Device




By Using Download Magisk Zip

  1.  Download Magisk Zip and Download No verity opt encrypt.zip and Movie to Mobile Storage
  2. Then Switch your Phone
  3. Turn On your at Recovery Mode (hold the Volume Down + Power button)
  4. TWRP Recovery, Select INSTALL
  5. Then Browse and Select the saved file of  SuperSU Zip
  6. Now Click Install Button
  7. Go again to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
  8. Finally, Reboot Your Device
  9. Congratulations, you successfully Rooted your Device

Read Also: How to Install TWRP Recovery and Root Xiaomi Mi 10 | Guide

Hopefully, we assume that this article remains informative for you, and you have successfully created a TWRP Recovery and Root Xiaomi Mi 10 Pro on your device. Thanks for being with us and sharing your more valuable feedback and opinion. For any queries, please let us know in the comment section down below.

Recommended Post

x
Advertisements