Mokee OS is a popular custom ROM and is supported by several devices across the globe. They are among the most popular firmware distribution communities that boost performance and deliver a stock Android.

Whereas if you are wondering why we need a custom ROM if we already have the manufacturer’s OS. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Many people were excited to experience the latest Android Version.

Mokee OS finally extended the support for some new devices, including the Samsung Galaxy S5 (China,SM-G9006V,G9008V). Today we will help you with this Complete guide to download and install custom ROM on your Samsung Galaxy S5 (China,SM-G9006V,G9008V).

Noteworthy: Mokee OS Android 10 for Samsung Galaxy S5 (China,SM-G9006V,G9008V)

This guide helps you to enhance your android experience with LineageOS. We will share your complete guide alongside the download link, and Even we also mention the requirements and steps to the installation process.

Get Ready to Install the Mokee OS Android 10

Your device must have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed LineageOS for Samsung Galaxy S5 (China,SM-G9006V,G9008V).

How to install Mokee OS Android 10 for Samsung Galaxy S5 (China,SM-G9006V,G9008V)

We recommend you to an instant complete article before you install LineageOS on your Samsung Galaxy S5 (China,SM-G9006V,G9008V). So you would not face any problems while installing LineageOS.

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Samsung Galaxy S5 (China,SM-G9006V,G9008V). You are responsible for any mistake and following flashing guide the files. Some functions don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Check Your Smartphone Supports Project Treble

  • Download and Install the checks the compatibility of project treble. Download Here
  • Now, Run the app
  • If you are green in the test, then you are good to go.
  • Also, see if you are green for the seamless system update; otherwise, you cannot proceed to install this ROM.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Samsung Galaxy S5 (China,SM-G9006V,G9008V).
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the Samsung Galaxy S5 (China,SM-G9006V,G9008V) Bootloader and set up instructions.
  4. Then, Download and Manually Install Android USB Drivers on your PC

    Additionally, Download Mokee OS Android 10 ROM

  5. Lastly, Gapps For Mokee OS Android 10 [Android 10] ♠ ARM: Download Open Gapps 10 ARM Zip
    ♠ ARM64: Download Open Gapps 10 ARM64 Zip
    ♣ | Download
  6. Download Latest TWRP Recovery. Download Here
    How to install TWRP Recovery
  7. That’s it, and you have finished the download files that you have to flash or install on your device.

How to Unlock Bootloader on Samsung Galaxy S5 (China,SM-G9006V,G9008V)

  1. Start with Enabling Developer mode On Samsung Galaxy S5 (China,SM-G9006V,G9008V)
  2. Open the setting on your Mobile, and select “About.”
  3. Tap seven times on “Build number.”
  4. Go Back to Settings, And Search “Developer option,” and Open It.
  5. Now, Enable OEM Unlock and power Off your mobile.
  6. Now, open your smartphone into a Download mode by pressing and holding the volume down button and power button.
  7. After that, a long-pressing Volume down button.
  8. This Process will unlock your bootloader
  9. you have success full unlock the bootloader

Here is the guide to follow the instructions

  1. Starting with install the latest TWRP recovery, flash the Decryption fix file.
  2. Swipe right to confirm the flash.
  3. Now, Flash the Android 10 GApps by going to TWRP to Install to Then select GApps zip file and swipe right to flash.
  4. Reboot to recovery
    • For Recovery and Download
      First, Power off your device, hold the Volume Down + Power button and then navigate using the volume rocker.
  5. Then, Wipe cache, Data, and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, you have to reboot the recovery, or you might get an error/issue.)
  6. Click Install and Flash Mokee OS Android 10 on your Device
  7. Now follow the same steps to install LineageOS 17 GApps on your device.
  8. Reboot your Samsung Galaxy S5 (China,SM-G9006V,G9008V) again
  9. That’s it, and You can now enjoy the Mokee OS Android 10.

Hopefully, We believe you have successfully installed the Mokee OS Android 10 on your Samsung Galaxy S5 (China,SM-G9006V,G9008V). Thanks for being with us. Don’t forget to share the bugs, So we can share with developers to fix those issues in the comment section down below.