crDroid is a popular custom ROM and is supported by several devices across the globe. They are one of the most popular firmware distribution communities that give users to boost performance and deliver a stock Android. Download and Install crDroid on Samsung Galaxy S10+ [Android 10]

Whereas if you are wondering why we need a custom ROM if we already have the OS provided by the manufacturer. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Many people were excited to experience the latest Android Version.

crDroid finally extended the support for some new devices, including the Samsung Galaxy S10+. Today we are going to help you

with this Complete guide to download and install custom ROM on your Samsung Galaxy S10+.

Noteworthy: crDroid for Samsung Galaxy S10+

This guide helps you to enhance your android experience with crDroid. We are going to share your complete guide alongside download link, Even we also mention the requirements and steps to the installation process.

Get Ready to Install the crDroid

It is important that your device should have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed crDroid for Samsung Galaxy S10+.\

How to install crDroid for Samsung Galaxy S10+

We recommend you to an instant complete article before you install crDroid on your Samsung Galaxy S10+. So you would not face any problems while installing crDroid.


Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Samsung Galaxy S10+. You are responsible for any mistake and following flashing guide the files. There were some functions that don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Check Your Smartphone Supports Project Treble

  • Download and Install the checks the compatibility of project treble. Download Here
  • Now, Run the app
  • If you are green in the test then you are good to go
  • Also, see if you are green for the seamless system update otherwise you cannot proceed to install this ROM.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Samsung Galaxy S10+.
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the Samsung Galaxy S10+ Bootloader, and Setup instructions. Unlock Bootloader
  4. Then, Download and Manually Install Android USB Drivers on your PC

    Additionally, Download crDroid ROM

  5. Lastly, Gapps For crDroid Android 10-Download Here
  6. Download Latest TWRP Recovery. Download Here For Exynos, or Download For Snapdragon
    How to Install TWRP Recovery
  7. That’s it, and you have finished the download files that you have to flash or install on your device.

How to Unlock Bootloader on Samsung Galaxy S10+

  1. Start with Enabling Developer mode On Samsung Galaxy S10+
  2. Open setting on your Mobile, and select “About.”
  3. Tap seven times on “Build number.”
  4. Go Back to Settings, And Search “Developer option” and Open It.
  5. Now, Enable OEM Unlock and power Off your mobile.
  6. Now, open your smartphone into a Download mode by pressing and holding the volume down button and power button.
  7. After that, a long-pressing Volume down button.
  8. This Process will unlock your bootloader
  9. you have success full unlock the bootloader

Here is the guide to follow the instructions

  1. Starting with install the latest TWRP recovery, flash the Decryption fix file.
  2. Reboot to recovery
    • For Recovery and for Download
      First Power off your device and then hold the Volume Down + Power button, then navigate using volume rocker.
  3. Then, Wipe cache, Data and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, then you have to reboot the recovery, or you might get an error/issue.)
  4. Click Install and Flash crDroid on your Device
  5. Swipe right to confirm the flash.
  6. Now, Flash the pie GApps by going to TWRP to Install to Then select GApps zip file and swipe right to flash.
  7. Reboot your Samsung Galaxy S10+ again
  8. That’s it, and You can now enjoy the crDroid.

Read Also: How to Download and Install LineageOS 17.1 for Umidigi A5 Pro [Android 10]

Hopefully, We believe you have successfully installed the crDroid on your Samsung Galaxy S10+. Thanks for being with us. Don’t forget to share the bugs, So we can share with developers to fix those issues in the comment section down below.