How To Flash Realme Devices By Realme Flash Tool | Download and Install Realme Flash Tool

Realme Flash Tool use to flash stock firmware on Realme Smartphone. So, Today we guide ” How to Flash Realme Device by using the Realme Flash tool.

Basic Pre-Requirements

1. Unlock the Realme Smartphone Bootloader, and Setup instructions can be found on
   –Quick Disclaimer
   • Your device data will be erased.
   • Charge your devices at least above 60%
   • 1x USB Cable and 1X Pc/MacBook
   • 1 x Realme Flash tool
   • 1 x Realme UI package
2. Then, Download and Manually Install Android USB Drivers on your PC
   
   • Download ADB USB Driver
   • How to Install ADB USB driver

Download Realme Flash Tool

Do at your own Risk

AndroidGreek doesn’t take any responsibility for any error/Damage/Losing data on your smartphone. You are responsible for any mistakes and follow the flashing guide for the files. There were some functions that don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

How To Flash Realme Devices By Realme Flash Tool

1. First, Download and install the Realme Flash Tool on your Window.
2. Now, Download and install the USB driver on your Windows PC.
3. Then, Download and Extract the Stock Firmware (Realme Flash File) in .ofp File
4. Now, Extract the Realme tool and After open the Realme Flash Tool.
5. Once Realme Flash to Open, you will see the Browse Option and Click it
6. Now Browse the .ofp Firmware on you window PC
7. Turn off the Realme Smartphone > Press and Hold Power and Volume Down key at the same time to enter the fastboot mode.
8. After that, Connect your Smartphone to the Computer using the USB cable:
9. Click on the Loading button to allow the flash tool to identify the connected device.
10. Now, Click on the Flash button and after Realme Flash Tool Start
11. Then, Click on the Confirm button to start the flashing or installation process
12. Realme Flash Tool Start Confirm
13. Once the flashing or installation process is completed.
14. You will be displayed Flashing Completed message on the tool {Realme Flash Tool Success}
15. Congratulations, you have Successfully Flash Realme device by the Realme Flash tool.
16. Then After Disconnect the device and Restart it.

Hopefully, we believe you have successfully Successfully  Flash Realme device by the Realme Flash tool. Thanks for being with us. Don’t forget to share the bugs, so we can share them with developers to fix those issues in the comment section down below.