What is TWRP
TWRP Stand For Team Win Recovery. Project Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, which is functions often unsupported by stock recovery images. You easy to root and Unroot Devices.
Get Ready to Install TWRP Recovery on Redmi K30 5G
Your device must have the bootloader unlocked. Download and Install TWRP Recovery On Redmi K30 5G and Easy to Root and Unroot Your Device.
Redmi K30 5G Information
The Device Will be Powered by Qualcomm Snapdragon 765G Integrated 5G Soc. Where the G Stands for Gaming, Means the Chipset Will have a More Powerful Graphics and Computing Capabilities to perform More AI Computing Task Using a 5TOPS. Redmi K30 5G comes with a 6.67-inch IPS Display With a punch-hole Panel placed at the Right Side of the Screen. The Hole-punch-Hole Will be in 4.38mm in Size, It also been an AG Frosted Glass Rear panel Quite Similar to Oneplus 7T.
In the Terms of Camera, The Device Comes With a Quad Rear Mounted Camera Sensor Housing a 64MP Sony IMX686 With an F/1.89 aperture Lense. Which is a 1/1.73-Inch Size? Meanwhile, There also an 8MP Ultra-Wide angle Lens + 5MP Telephoto Lens + 2MP Macro lens.
Basic Pre-Requirements
- Enable the USB Debugging on your Redmi K30 5G
- Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
- Unlock the bootloader of Redmi K30 5G : Follow this guide to unlock the bootloader.
–Quick Disclaimer
Then, Download and Manually Install Android USB Drivers on your PC -
- Additionally, Download TWRP of Redmi K30 5G
How to install TWRP on Redmi K30 5G
- First, Switch Off your Smartphone
- Open your Mobile Fastboot
- Using power off your device and then hold the Volume Down + Power button
- Now, Open the Adb Folder On your pc and Laptop
- Then, Select the Address Bar of Adb File
- Type Cmd and hit the Enter button
- Types the command in Cmd (Inside “Filename,” You can drag the file directly to the CMD instead of Typing.)
|
Congratulation, you are successfully installed TWRP File on Redmi K30 5G
How to Root Redmi K30 5G
There are two Methods to Root You Redmi K30 5G
- By using SuperSU Zip
- By Using Download Magisk Zip
Using SuperSU Zip
- Download SuperSU Zip and Download No verity opt encrypt.zip and Movie to Mobile Storage
- Then Switch your Phone
- Turn On your at Recovery Mode (hold the Volume Down + Power button)
- In TWRP Recovery Go to Android Backup
- TWRP Recovery, Select INSTALL
- Then Browse and Select the saved file of SuperSU Zip
- Now Click Install Button
- Again go to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
- Finally, Reboot Your Device
- Congratulation, you successfully Rooted your Device
By Using Download Magisk Zip
- Download Magisk Zip and Download No verity opt encrypt.zip and Movie to Mobile Storage
- Then Switch your Phone
- Turn On your at Recovery Mode (hold the Volume Down + Power button)
- TWRP Recovery, Select INSTALL
- Then Browse and Select the saved file of SuperSU Zip
- Now Click Install Button
- Again go to install Button, then Browse and Install No verity opt encrypt.zip and confirm install
- Finally, Reboot Your Device
- Congratulation, you successfully Rooted your Device
Read Also: How to Install TWRP Recovery and Root Xiaomi Mi 10 | Guide
Hopefully, We assume that this article remains informative for you, and You have successfully created a TWRP Recovery and Root Redmi K30 5G on your device. Thanks for being with us, share your more valuable feedback and opinion. If any queries, let us know in the comment section down below.
