Realme start rolling out the Realme 5 Pro February and March 2021 Android Security Patch Update with major improvements and fix known bugs so far. Meanwhile, the device was Optimized Control Center switch logic, Fix voice failure issue in PUBG and Restoring default ringtone and Optimized improve system stability and performance.

Although, the device offers an update package with the build number RMX1971EX_11_C.12. Not to mention this is a stages rollout suggesting for limited devices in order to ensure the updated stability.

How to Check Software Update on Realme 5 Pro

It is quite easy to perform. Follow the following steps mention down below.

  • First thing first, Open your device settings and then head over to the software update.
  • After that, click on the Check update, and then there it notifies you about your
    current stats of update.
  • Once you received it, click on Update Now.
  • That’s it.
Update log - Changelog

Update Log:


  • Updated Android security patch: Feb, Mar, 2021


  • Optimized the control center switch logic
  • Fixed the probabilistic issue that the phone ring tone is restored to the default ring tone
  • Fixed the probabilistic voice failure issue in PUBG
  • Optimized system performance and improve system stability

Realme 5 Pro Key Specification

  • 6.3-inch Full HD+ (2340 × 1080 pixels, Corning Gorilla Glass 3+ )
  • Snapdragon 712. Adreno 616 GPU
  • 4/6/8GB (LPPDDR4x) RAM with 64/128GB (UFS 2.1), 256GB microSD
  • Android 9.0 (ColorOS 6.0)
  • 48MP Sony IMX586 f/1.79 + 8MP 119° ultra-wide angle f/2.25 + 2MP depth f/2.4 + 2MP f/2.4
  • Front: 16MP Sony IMX471 f/2.0
  • 4035mAh battery (VOOC 3.0 fast charging)

How to Update on Realme 5 Pro

Make sure you have a proper backup of your data. Follow the following instruction mention down below.

  • The update is pushing in staged, once you get the update
  • Click on download and install it on your device.
  • That’s it.

How to downloads and install on Realme 5 Pro

With this following method, you can also rollout by downloading the stable firmware package. Follow the following guide mention down below.

  • Download the Realme UI 2.0 stable package and then copy it to the internal storage.
  • After that, Navigate to Settings -> System -> System Upgrade -> Gear in the upper right corner -> Local Upgrade -> Click on the corresponding installation package -> Upgrade now -> System upgrade
  • Now, Restart once it 100% upgrade.
  • That’s it.

Thanks for being with us. We would like to know your valuables opinion and feedback if there is any query share with us in the comment section below. Stay tuned for further updates in the future on the same.