Advertisements

Xiaomi rolled out their latest MIUI 11 based on Android 10, where it brings the latest security patch with build number V12.5.1.0.RFBRUXM . Mi 9 SE (grus) received the update through OTA update which brings device optimization system performance alongside improved system security and stability.

Xiaomi Software Update – Firmware, Stock Rom and Update

In this article, you will found the Mi 9 SE (grus) latest software version with installation guide. Checkout the following instruction step-by-step mentioned down below.

Noteworthy

  • This is a staged rollout, to ensure the stability of the update. leftover device after ensuring the update didn’t have any critical bugs.
  • You might experience heating, lagging, and fast battery draining to several optimizations automatically. However, it will become normal after few days, once it did with automatic optimization.
  • Don’t root your device, it will avoid your device warranty service.

Pre-Requirements

  • Keep back up your data before flashing your device to avoid incompatibility or unforeseen circumstances.
  • The device should be charged 30%
  • Wi-Fi or Stable Cellular Connectivity Recommended avoiding package loss
  • Don’t turn off your device during the update process

Download Mi 9 SE (grus) Stock ROM

Check out the firmware details including build number, Update Size, Region and more mentioned down below, and download accordingly.

Download Build V12.5.1.0.RFBRUXM (Russia) 

Download Build V12.5.1.0.RFBRUXM (Russia)  

Android Version: 11.0
Size: 2.6 GB/ 3.1 GB Respectively
MD5: 3afb69f8a70b70e381d03ba7aa879fc7/ fb3f7d1c4716dfb5a43fed120958a775

Note: With this following method, you can also roll out by downloading the stable firmware package.

Download Xiaomi System update

XIAOMI SYSTEM UPDATE JUNE 2021

We believe that this article remains helpful for you, if there is any query share with us in the comment section down below.

Mi 9 SE (grus) OTA Download

Following the following instruction based on your preference, so without further ado let’s check it out…

How to update your Mi 9 SE (grus)

It is quite easy to download and install the latest update on your device.

  • Open device settings
  • Then, Click on System update
  • Now it will check for the latest update, click on Download and install
  • Wait to finish the install, and Reboot your device
  • That’s it!

Update your device using Firmware Package

  • Download and move the firmware to your internal storage.
  • Then, Click on it and then it promotes the update system dialogue box
  • Click on Update Now to confirm your action.
  • Wait for it to install and update your device.
  • That’s it

Update your device using Recovery Mode

  • Download the Stock ROM/ Firmware Update to your device or external storage
  • Then, power off your device
  • Press and hold the Power and Volume button, wait for a couple of seconds until your device enters Recovery mode.
  • Choose language according, and then locate your firmware package from the directory.
  • Once you find your Firmware, Click on Firmware and confirm your action.
  • Keep patience until it finishes the installation.
  • That’s it!

Once your device installed the latest firmware it will reboot, it takes some time depending on your device.

Software updates

You must install the latest software on your device, it enhanced your system stability and patch the security threat. In case if your device hasn’t received the OTA Update. There could be various reasons behind this.

However, You can download and install the update to your Mi 9 SE (grus) Global firmware. Some users also require firmware to flash their old smartphones. You can use the Firmware Flash file to install the update on your respective device in both situations.

x
Advertisements