![How to Download and Install crDroid OS 6 on Mi CC9 [Android 10]](http://www.androidgreek.com/wp-content/uploads/2020/06/CC9-1200x675.jpg)
crDroid is a popular custom ROM and is supported by several devices across the globe. They are one of the most popular firmware distribution communities that give users to boost performance and deliver a stock Android. Download and Install crDroid OS 6 on Mi CC9 [Android 10]
Whereas if you are wondering why we need a custom ROM if we already have the OS provided by the manufacturer. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Many people were excited to experience the latest Android Version.
crDroid finally extended the support for some new devices, including the Mi CC9. Today we are going to help you with this Complete guide to download and install custom ROM on your Mi CC9.
Noteworthy: crDroid OS 6 on Mi CC9
This guide helps you to enhance your android experience with crDroid. We are going to share your complete guide alongside download link, Even we also mention the requirements and steps to the installation process.
Get Ready to Install the crDroid
It is important that your device should have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed crDroid for Mi CC9.
How to install crDroid for Mi CC9
We recommend you to an instant complete article before you install crDroid on your Mi CC9. So you would not face any problems while installing crDroid.
About Mi CC9
| Device | Mi CC9 |
| Processor | Qualcomm SDM710 Snapdragon 710 (10 nm) |
| RAM/ROM | 64GB+6GB RAM |
| Screen | 6.39 inches with 1080 x 2340 pixels |
| Battery | 4,030 mAh battery with 18W fast Charging |
| Camera | 48+8+2MP Rear, 32MP Selfie |
Check Your Smartphone Supports Project Treble
- Download and Install the checks the compatibility of project treble. Download Here
- Now, Run the app
- If you are green in the test then you are good to go
- Also, see if you are green for the seamless system update otherwise you cannot proceed to install this ROM.
Basic Pre-Requirements
- Enable the USB Debugging on your Mi CC9.
- Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
- Unlock the Mi CC9 Bootloader, and Setup instructions. Unlock bootloader
- Then, Download and Manually Install Android USB Drivers on your PC
Additionally, Download crDroid ROM
-
- OFFICIAL BUILDS:
crDroid for Mi CC9
- OFFICIAL BUILDS:
- Lastly, Gapps For crDroid [Android 10]
♠ ARM: Download Open Gapps 10 ARM Zip
♠ ARM64: Download Open Gapps 10 ARM64 Zip
♣ BiTGApps_Q_System.zip | Download - Download Latest TWRP Recovery. Download Here
How to install TWRP Recovery - That’s it, and you have finished the download files that you have to flash or install on your device.
Here is the guide Install crDroid follow the instructions
- Starting with install the latest TWRP recovery, flash the Decryption fix file.
- Reboot to recovery
BOOT MODES - For Recovery and for Download
First Power off your device and then hold the Volume Down + Power button, then navigate using volume rocker.
- For Recovery and for Download
- Then, Wipe cache, Data and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, then you have to reboot the recovery, or you might get an error/issue.)
- Click Install and Flash crDroid on your Device
- Swipe right to confirm the flash.
- Now, Flash the pie GApps by going to TWRP to Install to Then select GApps zip file and swipe right to flash.
- Reboot your Mi CC9 again
- That’s it, and You can now enjoy the crDroid.
Hopefully, We believe you have successfully installed the crDroid on your Mi CC9. Thanks for being with us. Don’t forget to share the bugs, So we can share with developers to fix those issues in the comment section down below.
