crDroid is a popular custom ROM and is supported by several devices across the globe. They are one of the most popular firmware distribution communities that give users to boost performance and deliver a stock Android. Download and Install crDroid on Motorola Moto G7 Power [Android 10]

Whereas if you are wondering why we need a custom ROM if we already have the OS provided by the manufacturer. However, there is always specific lifeline support from manufacturing and delays on the latest Android upgrade rollout. Many people were excited to experience the latest Android Version.

crDroid finally extended the support for some new devices, including the Motorola Moto G7 Power. Today we are going to

help you with this Complete guide to download and install custom ROM on your Motorola Moto G7 Power.

Noteworthy: crDroid for Motorola Moto G7 Power

This guide helps you to enhance your android experience with crDroid. We are going to share your complete guide alongside download link, Even we also mention the requirements and steps to the installation process.

Get Ready to Install the crDroid

It is important that your device should have the bootloader unlocked, and you have installed the TWRP Recovery. If you have done that, Let downloaded and installed crDroid for Motorola Moto G7 Power.

How to install crDroid for Motorola Moto G7 Power

We recommend you to an instant complete article before you install crDroid on your Motorola Moto G7 Power. So you would not face any problems while installing crDroid.

Do at your own Risk
AndroidGreek doesn’t take any responsibility for any error/Damage/Lossing data on your Motorola Moto G7 Power. You are responsible for any mistake and following flashing guide the files. There were some functions that don’t operate properly and can cause serious damage to your device. Eve, the Widevine L1 support will be replaced by Widevine L3

Check Your Smartphone Supports Project Treble

  • Download and Install the checks the compatibility of project treble. Download Here
  • Now, Run the app
  • If you are green in the test then you are good to go
  • Also, see if you are green for the seamless system update otherwise you cannot proceed to install this ROM.

Basic Pre-Requirements

  1. Enable the USB Debugging on your Motorola Moto G7 Power.
  2. Turn on the adb and fastboot: HOW TO INSTALL ADB AND FASTBOOT IN WINDOW AND MAC.
  3. Unlock the Motorola Moto G7 Power Bootloader, and Setup instructions. Unlock Bootloader
  4. Then, Download and Manually Install Android USB Drivers on your PC

    Additionally, Download crDroid ROM

  5. Lastly, Gapps For crDroid Android 10-Download Here
  6. Download Latest TWRP Recovery. Download Here
  7. That’s it, and you have finished the download files that you have to flash or install on your device.

Here is the guide to follow the instructions

  1. Starting with install the latest TWRP recovery, flash the Decryption fix file.
  2. Reboot to recovery
    BOOT MODES
    • For Recovery and for Download
      First Power off your device and then hold the Volume Down + Power button, then navigate using volume rocker.
  3. Then, Wipe cache, Data and Dalvik cache. [Note: you don’t have to wipe the Vendor] (If you format instead of wipe cache, then you have to reboot the recovery, or you might get an error/issue.)
  4. Click Install and Flash crDroid on your Device
  5. Swipe right to confirm the flash.
  6. Now, Flash the pie GApps by going to TWRP to Install to Then select GApps zip file and swipe right to flash.
  7. Reboot your Motorola Moto G7 Power again
  8. That’s it, and You can now enjoy the crDroid.

Read Also: How to Download and Install LineageOS 17.1 for Umidigi A5 Pro [Android 10]

Hopefully, We believe you have successfully installed the crDroid on your Motorola Moto G7 Power. Thanks for being with us. Don’t forget to share the bugs, So we can share with developers to fix those issues in the comment section down below.