Packet loss is one of the temporary issues faced by users in COD: Warzone. However, there can be various reasons for getting this issue. Interestingly, the issue is for a short time but acts as an annoying situation. Moreover, to analyse the cause and solution to packet loss in COD: Warzone. We have researched a lot about this specific concern and found some common issues.
Those causes are probably the main things that lead to packet data loss. Meanwhile, in this article, we will discuss more about how to fix packet loss and packet burst in Warzone Packet Loss.
How to Fix Packet Bursts and Packet Loss in Warzone
In order to fix the issue, below we are stating some specific issues along with their solutions. So, let’s take a look at them.
Always connect via a wired connection.
It is recommended to use a wired connection rather than a wireless connection. Because it’s experienced that wired connections are more stable than wireless connections.
Modify your NAT Type
NAT stands for Network Address Translation, and there are three options: open, moderate, and strict.However, these options can vary as per different platforms. Meanwhile, you have to set your NAT Type to open or Type 1. For this, you have to follow the below given steps.
- First, type in your router’s IP address into your web browser.
- Then, log in to your router.
- Now, locate the Port Forwarding Section.
- Next, paste the IP address of your PC.
- Then, enter the correct TCP and UDP ports for your game as listed below.
- TCP: 3074, 27014-27050
- UDP: 3074, 3478, 4379, 4380, 27000-27031, 27036
- Hence, it will set your NAT type to “open” and fix the packet data issue in Warzone.
Although there can be some more causes, we have found these two causes are the most highlighted in influencing the packet data issue.
Hopefully, we can now expect that you all have accurate content about how to fix packet loss and packet burst in Warzone Packet Loss. And, it’s also well-known about the various causes and fixes for the packet data issue in Warzone. In response to this, if any user has any queries, share them with us in the comment section down below.
